FEATURES:
1, Automatically turn on and turn off the power of the dust collector, allowing you to focus on your work without having to repeatedly manually operate the power switch. The design is based on a microcontroller and a sophisticated power detection IC, making the product more intelligent and friendly. This product has the power-on self-test, power and load status information will be collected within 10 seconds for more accurate control and usage.
2, Operating voltage AC 100 to 130V(60Hz). Maximum current 15 Amp. Maximum load 1800 Watts. Polycarbonate flame retardant material plastic case. Length 19 inch (0.5 meter) power cable, UL-certified American Standard 14AWG (2.08 square millimeter) x 3 cores.
3, When you start to use the tool, tool power more than 30 watts will trigger vacuum power on, the dust collector will turn on with a delay of 1 second to avoid overloading and tripping of the power circuit. When the tool is stopped, the dust collector will delay for ten seconds before it stops working.
4, The working mode of the dust collector ON - AUTO - OFF can be manually selected by override switch. This is a three-position rocker switch with a dust cap to effectively prevent dust and protect the switch.
5, A red and green bicolor status indicator LED, the LED is red when the utility power is connected but the tool is not in operation, and green when the tool triggers the vacuum power on.
SPECIFICATIONS:
AC power: 100 to 130VAC (60Hz)
Maximum total current: 15 Amps
Maximum load: 1800 Watts
Override switch mode: ON - AUTO - OFF.
Trigger power: 30 Watts.
Delay time: 10 Seconds.
USD
EUR
GBP
CAD
AUD
